7
Configuration Using the Console Interface
48-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet
Chapter 4
Chapter 4:
Configuration Using the
Console Interface
Overview
The Switch features a menu-driven console interface for
basic switch configuration. You can easily manage your
network from the screens through the console port.
Before you can use the console interface, you will need to
configure the HyperTerminal application.
Configuring the HyperTerminal Application
Click the Start button.
Select Programs > Accessories > Communications >
HyperTerminal.
Start > Programs > Accessories > Communications > HyperTerminal
Enter a name for this connection. In the example, the
name of the connection is SRW248G4P. Select an icon
for the application, then click OK.
HyperTerminal Connection Description Screen
1.
2.
3.
Select a port to communicate with the switch. Select
COM1 or COM2.
HyperTerminal Connect To Screen
Set the serial port settings as follows, then click OK.
Bits per Second: 38400
Databits: 8
Parity: None
Stop bits: 1
Flow control: None
HyperTerminal Properties Screen
4.
5.
