2-9
Cisco ICS 7750 System Description
78-10360-02
Chapter 2 Processor Cards Feature Summary
System Switch Processor Card
The Ethernet ports are identified as follows:
• f0/1—External 1x port for connecting to 10BASE-T, 100BASE-TX, and
10/100 Ethernet switches
• f0/2—External 2x port for connecting to 10BASE-T, 100BASE-TX, and
10/100 Ethernet switches
• f0/3—Slot 1
• f0/4—Slot 2
• f0/5—Slot 3
• f0/6—Slot 4
• f0/7—Slot 5
• f0/8—Slot 6
Feature Summary
Key features and benefits of the SSP include the following:
• 10BASE-T/100BASE-TX support—The 10/100 Ethernet support delivers
high performance where required. Any investment in legacy 10BASE-T
equipment is preserved.
• Autosensing—Each 10/100 port detects the speed of an attached device and
automatically configures the port for 10 or 100 Mbps. Autosensing eases
deployment in mixed 10BASE-T and 100BASE-T environments.
• Autonegotiating—Each 10/100 port automatically selects half- or full-duplex
transmission mode to optimize bandwidth utilization.
• Flash memory—The SSP stores configuration information in Flash memory
and NVRAM.
• Supports IEEE 802.1p class of service (CoS) with two queues on each port to
prioritize voice and data traffic.
• Supports quality of service (QoS).
