Preface
Organization
x
Cisco ICS 7750 System Description
78-10360-02
Note This guide is not intended to instruct you on how to install or service a
Cisco ICS 7750 but rather is intended to provide an overview of how to use the
product in voice and data networking.
Organization
This guide is organized as follows:
• Chapter 1, “Overview,” provides a functional overview, describes the
features, and gives a system overview of the Cisco ICS 7750.
• Chapter 2, “Processor Cards Feature Summary,” describes the features of the
cards supported by the Cisco ICS 7750, such as the analog station
interface (ASI), system processing engine (SPE), system switch
processor (SSP), multiservice route processor (MRP), and system alarm
processor (SAP).
• Chapter 3, “Summary of Power and Cooling System Features,” describes the
features of the chassis, backplane, power supplies, and fan tray of the
Cisco ICS 7750.
• Chapter 4, “Summary of System Software Features,” describes the features of
the system software, such as the ICSConfig program, Cisco ICS System
Manager, and the Fault Management Module (FMM).
• Chapter 5, “Summary of Software Applications Features,” describes the
features of applications that are supported on the Cisco ICS 7750, such as
Cisco CallManager, Cisco IOS Firewall, Cisco Unity, and AutoAttendant.
• Chapter 6, “Features of Cisco IP Phones,” describes the features of the
Cisco IP Phones and the Cisco IP SoftPhone and WebAttendant applications.
• Chapter 7, “Features of LAN-Based Switching Technologies,” describes the
features of the Catalyst 3524-PWR XL switch, the Catalyst 4000 switch, and
the Catalyst 6000 switch.
• “Chapter 8, “Features of Other Compatible Cisco Devices,” describes the
features of the Cisco 1750 Modular Access Router, the Catalyst 2600 switch,
the Catalyst 2900 series switches, the Cisco Voice Gateway 200, and the
DT-24+ and DE-30+ modules.
