4-5
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Chapter 4 Optical Cards
4.2 4.2 OC3 IR 4/STM1 SH 1310 Card
4.2 OC3 IR 4/STM1 SH 1310 Card
Note For hardware specifications, see the “A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications” section on
page A-25. See Table 4-2 on page 4-4 for optical card compatibility.
OC3 IR /STM1 SH 1310-8
— — — — — — — Yes Yes — Yes — Yes Yes Yes
OC12 IR/STM4 SH 1310
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC12 IR 1310
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC12 LR 1310
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC12 LR 1550
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC12 LR/STM4 LH 1310
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC12 LR/STM4 LH 1550
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC12 IR/STM4 SH 1310-4
— — — — — Yes Yes Yes Yes — Yes — Yes Yes Yes
OC48 IR 1310
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC48 LR 1550
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC48 IR/STM16 SH AS 1310
2
— — — Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC48 LR/STM16 LH AS 1550
3
— — — Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC48 ELR/STM16 EH 100 GHz
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC48 ELR 200 GHz
Yes Yes Yes Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC192 SR/STM64 IO 1310
— — — — — — — Yes Yes — Yes — Yes Yes Yes
OC192 IR/STM64 SH 1550
— — — — — — — Yes Yes — Yes — Yes Yes Yes
OC192 LR/STM64 LH 1550
(15454-OC192LR1550)
— — — Yes Yes Yes Yes Yes Yes — Yes — Yes Yes Yes
OC192 LR/STM64 LH 1550
(15454-OC192-LR2)
— — — — — — — Yes Yes — Yes — Yes Yes Yes
OC192 LR/STM64 LH ITU 15xx.xx
— — — — — — — Yes Yes — Yes — Yes Yes Yes
15454_MRC-12
— — — ——————— —— —YesYes
OC192SR1/STM64IO Short
Reach and OC192/STM64 Any
Reach
4
— — — ——————— —— —YesYes
1. DWDM-only release.
2. To enable OC-192 and OC-48 any-slot card operation, use the XC10G or XC-VXC-10G card, the TCC+/TCC2/TCC2P card, Software R3.1 or later, and the
15454-SA-ANSI or 154545-SA-HD shelf assembly. Note that the TCC+ card is not compatible with Software 4.5 or later.
3. To enable OC-192 and OC-48 any-slot card operation, use the XC10G or XC-VXC-10G card, the TCC+/TCC2/TCC2P card, Software R3.1 or later, and the
15454-SA-ANSI or 154545-SA-HD shelf assembly. Note that the TCC+ card is not compatible with Software 4.5 or later.
4. These cards are designated as OC192-XFP in CTC.
Table 4-2 Optical Card Software Release Compatibility (continued)
Optical Card R2.2.1 R2.2.2 R3.0.1 R3.1 R3.2 R3.3 R3.4 R4.0 R4.1 R4.5
1
R4.6 R4.7
1
R5.0 R6.0 R7.0
