Filter
Top Products
2
NOTE:
If your Disc Publisher is damaged during shipment, please contact the freight carrier first,
then contact your distributor or TEAC.
You should save your shipping materials so that if the need arises you can return your Disc
Publisher for service. This packaging was designed specifically for shipping your Autoloader.
Other packaging may not be as suitable.
Other Requierments
Your Disc Publisher system may require addition Part(s) depending on the printer
configuration.
P-55 Mount Plate
P-55 operation will require for you to install the Mounting Plate. First remove the Inkjet Pins
from the Base Platform and save them. No screws are required to install the mounting plate due
to the two latching points on the Base Platform. Final setup will look like the picture below.
Adjustment Knob
Pin for
Inkjet
Printer
Base Platform
Fig. 2 Fig. 3
Fig. 4
Fig. 5