Filter
Top Products
18
Disc Image Name
Image names can be up to 14 characters long. Available characters are A-Z, 0-9 and
space (blank).
Key String
Key Strings are 14 characters long. Available characters are 0-9 and A-F.
Numbers
Numbers are 4 digits long. Available digits are 0-9.
Disc Image names can be entered using the ‘Last Char Name’. Please also see ‘Last
Char Name’ under Duplication Options above.
Copying Discs
There are two basic methods of copying Discs. The first is to read a master & start
copying immediately. The second is to start copying using a master image already
stored on the internal hard disk (usually created by a previous Copy job, or by using
the Image Functions | Load New Master function).
To start copying from a new master, use the up /\ or down \/ arrow keys to put the >
cursor (on the Left of the LCD display) next to the Start Copying menu line. Press the
ENTER key to select that menu function. If there is already an image on the hard drive
the following prompt will be displayed:
Read New Master?
If there are no master images currently on the hard disk, this message will not appear.
Press the YES key. The next prompt will be for an Image name.
Enter Image Name
[ ]
Use the /\, \/, > & < keys to enter a name for the image (see Entering Text). To use the
default name (“NONAME”) just press the ENTER key. Next the system will ask for
the number of Discs to copy:
Enter Quantity
[0000]