Filter
Top Products
15
Max Consec.bad
Default Setting for this should be OFF.
Master Drive
This option allows the user to select which drive (recorder or CD-ROM drive if
installed) will be used to read the master. Use the left and right arrow keys to
select the desired drive.
Stop Reject Full
This should be sent to YES. The rejected disc count is kept, and once it reaches a
trigger level, duplication will halt - waiting user intervention to clear the reject
pile. This prevents the fouling of the lower drives by the reject pile, and it is
recommended that this be always set to YES. The count is made on a ‘per Job’
basis, and so it is expected that the reject area be cleared before the start of any
duplication job.
Sticky Media
If set to yes the loader will be more persistent when picking discs. Picking
behaviour will include a shake during an input above the input stack. Certain
types of media have been found to ‘stick’ together, and although the loader
mechanism has been designed to pick, and physically touch one disc at a time,
the attraction between discs can cause two to be picked at once. It is highly
recommended that you avoid using any media that exhibit ‘sticky’ properties.
This setting will help when you have to.
Mini Disc Mode
This option will be for future options for Mini Disc printing. Check back with
us for availability of this option kit.
Last Char Name
This option determines the behaviour exhibited on entering image names on the
duplicator. If this is set to YES the cursor carries forward the previous character
entered. This allows for faster entering of names –through fewer button presses.
If a space is required, or the next letter you need is closer to the start of the
alphabet than the previous character entered, then moving the cursor back one
space, and then forward two spaces. The cursor only carries forward the previous
character if it was changed, and so by first shuffling backwards, you have a
blank. It does take some getting used to –but with use, it does provide an
improved way of quickly naming images.
When set to NO the system behaves in the way described in the ‘Entering Text’
section further through this manual.
Drive 1 & Drive 2
This option is for enabling or disabling one or both recorders in the system.