Filter
Top Products
ESPAÑOL
75
giradiscos
tornillo que ajusta el giradiscos para su transporte
Antes de usarlo, afloje completamente el tornillo girándolo en el sentido de las agujas del
reloj con una moneda o destornillador.
Al transportar la unidad, gire el tornillo en sentido contrario a las agujas del reloj para
fijar el giradiscos.
palanca de cue
Use esta palanca para levantar el brazo de tonos.
soporte para brazo de tonos
selector de velocidad
brazo de tonos
Adaptador G de 45 RPM
G
F
E
D
C
B
A
Partes del giradiscos
B
C
E
D
F
A
G
Antes de utilizarlo, desacople
el protector del lápiz (tapa de
plástico blanca) tirando
directamente de la parte
frontal del cartucho en la
dirección de la flecha.
To stop recording
Press the STOP button (H).
To suspend recording temporarily
Press the RECORD button (K) during recording.
The unit enters record pause mode.
“REC” and “USB” or “SD” indicator blinks. The red indicator
on the RECORD button blinks.
< To resume recording press the RECORD button (K) again.
< When the unit enters record pause mode, file will not be
divided. If you want to insert a file division, press the TRACK
INCREMENT button before the unit enters record pause mode
or after the unit restarts recording.
Manual file division
It is possible to divide the recording into files while recording.
While recording, press the TRACK INCREMENT button. The
current file number will be incremented by one.
< The TRACK INCREMENT button works when the
MANUAL/AUTO REC setting is set to MANUAL.
< This button don’t work during recording from CD.
< When this button is pressed, a blank of about 1 second will
be made.
During recording from a CD, when the PLAY/PAUSE button
(y/J) is pressed the playback of CD will stop temporarily,
but the recording will not stop and the file will not be divided.
C
B
A
26
Use these steps to select and erase files stored on a USB memory
stick or an SD memory card.
Slot the USB memory stick or the SD memory card that contains
the file you want to erase.
In USB or SD mode, press the MENU button.
1
< To cancel the menu setting mode, leave the unit idle for a
minute, or press the STOP button (H).
Turn the FUNCTION/REC LEVEL/SELECT knob to select
“ERASE”.
2
1 3 5
42
6 7
Recording 2
Press the PROGRAM/ENTER button.
3
A
C
B
Turn the FUNCTION/REC LEVEL/SELECT knob to select
the file to erase.
The file name appears on the display.
4
Erase