Filter
Top Products
8 TASCAM DR-1
3–Part names and functions
9 FX key
Briefly press this key to turn the effect function
ON and OFF.
Press and hold this key to open the Effect Setting
Screen. When the Effect Setting Screen is open,
press and hold this key to return to the Home
Screen. (See “Using the effects” on page 32.)
0 ¥/π key
When the Home Screen is displayed and playback
is stopped, press this key to start playback. During
playback, press this key to stop playback at the
current position.
When using a setting screen, use this key, for
example, to confirm a selection, advance a level
in a menu and answer “YES” to a confirmation
message
When the Metronome Screen is open, use this key
to start and stop the metronome.
q Wheel
When a setting screen is open, use the Wheel to
change the setting of the selected item.
When the Home Screen is open, use the wheel to
adjust the file playback position.
w STOP/HOME key
Press this key to stop recording and playback or to
end recording standby.
When a setting screen is open, press to return to
the Home Screen.
On a setting screen, use this key to respond “NO”
to a confirmation message.
e REC/PAUSE key
When playback is stopped, press this key to put the
unit into recording standby. When in standby, this
key flashes. If the Input Setting Screen
MONITOR
item is ON, the Overdubbing ON/OFF pop-up
appears. (See “Recording” on page 19.)
When in recording standby, press this key to start
recording. The key lights while recording.
When recording, press this key to pause recording.
r PEAK indicator
This lights when the selected input signal exceeds
the maximum level.
t Charge indicator
This indicator lights orange when the lithium ion
battery installed in this unit is charging. The light
turns OFF when the battery is fully charged.