Filter
Top Products
TASCAM DR-1 7
1 Built-in stereo microphone
To use this stereo electret condenser microphone
as the input source, select “
INT/MIC1
” on the
input setting screen. If you connect an external
microphone to the
MIC 1 IN jack on the rear panel,
the built-in microphone becomes inactive.
2 Display
In addition to the Home Screen, this shows the
recording screen various setting screens, and other
operation information. (See “Screen Overview” on
page 11.)
3 MENU key
When the Home Screen is displayed, press this key
to open the Menu Screen.
Press this key to return to the Menu Screen from
the various setting screens.
When the Menu Screen is displayed, press this key
to return to the Home Screen.
4 LOOP key
Press this key to turn loop playback mode ON and
OFF, allowing you to repeat playback of a selected
interval. (See “Loop playback” on page 31.)
5 I/O key
Use this key to set the IN (start) and OUT (end)
points of the interval that you want to set for
loop playback. When the IN and OUT points are
already set, press this key to erase them. (See
“Loop playback” on page 31.)
6 µ key
Press this key to return to the beginning of a track
that is playing or stopped in the middle.
If you press this key when a track is stopped at its
beginning, the unit will skip to the beginning of
the previous track.
Press and hold this key to search backwards.
On the setting screens, use this key to move the
cursor left.
On the Browse Screen, press this key to move up a
level.
7 ≤ key
Press this key during playback or when playback is
stopped to skip to beginning of the next track.
Press and hold this key to search forward.
On the setting screens, use this key to move the
cursor right.
On the Browse Screen, press this key to move
down a level.
8 PB CONTROL key
Press and hold this key to open the Playback
Control (
PB CONTROL
) Screen. When the
Playback Control Screen is open, press and hold
this key to return to the Home Screen. (See
“Special playback control functions” on page 29.)
Briefly press this key to turn the speed control
that is set on the Playback Control Screen (VSA
and/or SPEED) ON and OFF. When ON, the
icon appears at the top of the Home Screen as light
letters on a dark background.
3–Part Names and Functions
Top panel