Filter
Top Products
16 TASCAM DR-1
Connecting to the MIC 2 IN jack
Connecting to the LINE IN jack
5–Making Connections
Connecting to the MIC 1 IN jack
Connecting mics and other audio devices
This unit has a built-in stereo microphone that you can
use to practice or record your singing, for example,
but you can also use an external mic or other device
as an input. You can connect external sound sources to
the line input jack or one of two types of microphone
input jacks. The following sections explain how to use
the jacks to connect external devices. (See “Selecting
the input source” on page 20 for more about making
settings related to connections and input level setting.)
Audio device or other
external sound source
You can connect a one-point stereo electret condenser
microphone, for example, to the MIC 1 IN jack (stereo
mini-jack) on the rear panel. Use the Input Setting
Screen to adjust the level control, the low cut lter and
other settings. (See “Selecting the input source” on
page 20.)
You can connect, for example, a dynamic microphone
with a 1/4˝ plug to the
MIC 2 IN jack (standard mono
jack) on the front panel.
NOTE
The level control and filter functions cannot be used on the
input signal from this jack.
You can connect the line output of an audio device,
for example, to the LINE IN jack (stereo mini-jack) on
the rear panel.
NOTE
The DR-1 does not have any controls to adjust the input •
level of the
LINE IN jack.