Filter
Top Products
32 TASCAM DR-1
Turning the effect ON and OFF
Setting the effect
Closing the Effect Screen
13–Using the Effects
The DR-1 has built-in effects that can be applied to
the input signal during recording and practice.
Briey press the
EFFECT key to turn the effects
ON and OFF. When ON, the effect last set on the
Effect Screen becomes active, and the icon
appears as light letters on a dark background at
the bottom right of the Home Screen. (The default
setting is
RevHall
.)
Press and hold the FX key to open the Effect Screen.
As the illustration above shows, the Effect Screen has
three items that can be set. They are described at right.
Although it appears different from other setting
screens, operation is the same.
1 Use the wheel to select the desired item and press
the
¥/π key to access that item’s settings.
2 Use the wheel to set the desired value.
3 Press the
µ key when you are done making the
setting to return to item selection status.
PRESET
See the Effects Preset List on page 38 for details about
the preset effects.
LEVEL knob
Use this to change the output level of the preset effect
selected in the
PRESET
item. Select the
LEVEL
knob
icon and press the
¥/π key to select the numerical
value in the upper part of the icon. The level can be
set to values between 0 and 100.
DEPTH knob
This adjusts the character of the selected preset. Select
the
DEPTH knob icon and press the ¥/π key to select
the numerical value in the upper part of the icon. Use
the wheel to set the value.
Press the
STOP/HOME key (or press and hold the
EFFECT key) to return to the Home Screen.