Filter
Top Products
61
|
Area indication and
frequency range
Area* Frequency range
FM (MHz) AM (kHz)
USA 87.5–108 530–1,710
Eur 87.5–108 531–1,602
Japan 76–90 531–1,710
(AREA 1-8, JR)
*USA : USA, Canada, and Central
and South America
Eur :
European and other
countries
To receive stations in Japan
Select “AREA 1 to 8” or “JR” in
step 4 above.
Using the Menu
Adjusting playback
modes
You can adjust the following
playback modes using the Menu
function on the remote control or
on the main unit.
AVLS: Turn on to limit the
maximum volume to protect
your hearing (Automatic
Volume Limiter System)
(on the main unit, “ ”
indicates “on”).
a (PB MODE): Turn on to play
both sides repeatedly (on the
main unit, “a” indicates
“on”).
Plays both sides once from the
FWD side when turned off (on
the main unit, “Å” indicates
“off”).
a (PB aNR): Turn on when you
play back a tape recorded with
the Dolby* B NR system (on the
main unit, “ ” indicates
“on”).
* Dolby noise reduction
manufactured under license from
Dolby Laboratories Licensing
Corporation.
“DOLBY”and the double-D symbol
a are trademarks of Dolby
Laboratories Licensing
Corporation.
Notes
•The playback modes can be set or
canceled separately.
•The playback modes cannot be
adjusted while recording.
On the remote control
1 Press MENU to enter the
menu mode. “r” (the cursor)
will flash in the display of the
remote control.
2 Jog the jog lever upward/
downward repeatedly until
“r” flashes on the playback
mode to be adjusted.
3 Press the jog lever to enter.
You will hear a short beep and
“r” will appear for a few
seconds. Then, the display will
exit the menu mode.