Filter
Top Products
56
|
Note
•If the record-protect tab is broken,
you cannot record on that side.
1 Insert a normal (TYPE I) tape.
To record on both sides
Insert the cassette with the
side to be first recorded on as
the FWD (forward) side*.
* Make sure that “FWD” is
displayed. If not, press and
hold p•RADIO OFF until
“REV” changes to “FWD”.
To record on one side only
Insert the cassette with the
side to be recorded on as the
REV (reverse) side**.
** Make sure that “REV” is
displayed. If not, press and
hold p•RADIO OFF until
“FWD” changes to “REV”.
Note
•When the cassette holder is
opened, the direction of the
tape will be automatically set
to “FWD”.
2 Select a recording source:
To record with the
microphone
Connect the supplied
microphone to the MIC (PLUG
IN POWER) jack.
To record from the radio
Tune in to the station you
want to record (see “Listening
to the Radio”).
2 Press ϥREPEAT again to
tag point B.
“A-B” will flash and the tape
will be rewound to point A.
Then “REP” display and the
specified portion is played
repeatedly.
To cancel the A-B Repeat
playback
Press the jog lever on the remote
control or ϥREPEAT on the
main unit.
Notes
• You cannot specify a repeat portion
to include both sides of the tape.
• You cannot specify a repeat portion
of shorter than 2 seconds.
• After repeated operation, the actual
portion that is played back may
shift off somewhat from the exact
portion specified with the tags due
to tape slack.
• A-B Repeat will repeat 50 times
before returning to normal
playback if not canceled manually.
• Do not use the A-B Repeat function
with tapes longer than 90 minutes.
If you do, the tape may be
damaged.
Recording
You can record radio programs
from the built-in radio, or record
with the supplied microphone. In
either case, use a new or fully
charged battery.