Filter
Top Products
54
|
zOperating the
Walkman
Playing a Tape
1 Open the cassette holder and
insert a cassette.
2 Make sure the HOLD function
is turned off. If it is on, slide
the HOLD switch to turn it off.
3 Press the jog lever on the
remote control, or press
ϥREPEAT on the main
unit.
Adjust the volume with VOL.
When adjusting the volume on the
main unit
Set the VOL control on the remote
control at maximum.
When adjusting the volume on the
remote control
Set the VOL control on the main unit
to around 6.
Note on the cassette holder
When opening the cassette holder on
the main unit, make sure the tape is
stopped, then slide the OPEN switch.
If the cassette holder is opened when
the tape is running, the tape may
loosen and be damaged.
Operation on the remote
control
To
Play the other
side
Stop playback
Fast forward
Rewind
Play the next
track/
succeeding 9
tracks from the
beginning
(AMS*)
Play the current
track/previous
8 tracks from
the beginning
(AMS*)
Play the other
side from the
beginning
(Skip Reverse
function)
Operation on the
jog lever and
display
Press for more than
a second during
playback
(Playing side FWD:
“r” on “FWD”.
Playing side REV:
“r” on ”REV”)
Press once during
playback
Jog upward for less
than a second
during stop
(“FF” appears)
Jog downward for
less than a second
during stop
(“REW” appears)
Jog upward once/
for the number of
tracks to be
skipped during
playback
(“AMS” and the
number of tracks to
be skipped appear)
Jog downward
once/for the
number of tracks to
be skipped during
playback
(“AMS” and the
number of tracks to
be skipped appear)
Jog upward for 2
seconds or more
during stop
(“FF” flashes)
(continued)