Filter
Top Products
Chapter 6 Adjusting and Setting Through Menus
Chapter 6 Adjusting and Setting Through Menus 81 (GB)
LABEL DISP
Selects whether or not to display the tape label.
ON : Displays the tape label.
OFF: Hides the tape label.
Notes
• The tape label is displayed only on the LCD monitor or MONITOR VIDEO output.
• The tape label is only displayed if you have set the DISPLAY SELECT selector to DATA.
• If the tape label has been made with another VCR or camcorder, this unit cannot display a
tape label that includes a font that the unit does not have.
Icon/Menu
Submenu
Setting
(page)
CM SET menu
CM
CM SET
CM SEARCH Selects the mode used to search scenes.
ON : Searches scenes using the cassette memory. (If the cassette does not have
cassette memory, the search for the scenes can be done using the search signals on
the tape.)
OFF: Always searches scenes using the search signals on the tape.
TITLE DISP Selects whether or not to display the title.
ON : Displays the title.
OFF: Hides the title.
Notes
• The title input with the camera or external device is displayed. You cannot enter a title
using this unit.
• The unit cannot display a font that the unit does not have.
• The title is displayed only on the LCD monitor or MONITOR VIDEO output.
• The title is only displayed if you have set the DISPLAY SELECT selector to DATA.
Icon/Menu
Submenu
Setting
(page)
RMT
REMOTE
232C RATE Selects the baud rate via the RS-232C connector.
9600 : 9600 bps
19200: 19200 bps
Note
For editing, if you intend to use this unit as a player and the FXE-120/120P or FXE-100/
100P as an editing controller, set the baud rate of both devices to 19200 bps.