Filter
Top Products
Audio Dubbing
Chapter 5 Duplication and Audio Dubbing
74 (GB) Chapter 5 Duplication and Audio Dubbing
Audio Dubbing
You can record just sound on a recorded tape.
(Audio dubbing)
Note
You can dub the sound onto a DVCAM-formatted
tape (recorded) in the 32 kHz audio mode (4-channel/
12 bits). You cannot dub the sound on a tape in the 48
kHz audio mode (2-channel/16 bits). If the audio mode
of the recorded tape is 32 kHz, you can dub the sound
regardless of the AUDIO MODE setting on the
AUDIO SET menu.
For details on “AUDIO MODE,” see “AUDIO SET menu”
on page 88 (GB).
Connection of external devices
The following shows an example of a basic connection
for audio dubbing.
Selecting the input channels for audio
dubbing
You can dub the sound in the following channel
combinations: channels 1/2 or channels 3/4.
Set AUDIO DUB on the AUDIO SET menu to select
the input channels for audio dubbing.
CH1,2: Selects the channel 1/2 combination.
CH3,4: Selects the channel 3/4 combination.
OFF: Disables audio dubbing.
Headphones
PHONES
Audio output
Audio input
Note
You cannot dub sound in the following channel
combinations:
• Channels 1 to 4 simultaneously
• Only one channel
• Three channels simultaneously (excluding one
channel)
• Channel 1/3, channel 2/4, channel 1/4 and channel
2/3 combinations
1
CH-
1/2
MIN MAX
CH-
3/4
Sound source
Monitor
MONITOR VIDEO
DSR-45/45P
(rear panel)
AUDIO IN
CH-1, CH-2 or
CH-3, CH-4
DSR-45/45P
(front panel)
Video input
MONITOR AUDIO