Filter
Top Products
17
REDUCTION/ENLARGEMENT
With the ZOOM function, you can select copy ratio between AB system: A5 → A4 (141%), A4 → A5 (70%),
Inch system: 5.5X8.5 → 8.5X11(129%), 8.5X11 → 5.5X8.5 (64%), and 50%.
The method for enlarging or reducing the copies is described below.
With the [MODE SELECT] key ( ), you can manually select the ratio of reduction or enlargement.
Selectable ratios:
MANUAL RATIO SELECTION
Copies can be reduced down to A4 → A5 (70%), (8.5X11 → 5.5X8.5 (64%)) and 50%, or enlarged up to A5 → A4
(141%), (5.5X8.5 → 8.5X11(129%)). Press the [MODE SELECT] key ( ) to select a ratio.
1
Place the original on the document
glass.
2
Use the [MODE SELECT] key ( ) to
select the desired copying ratio.
Selecting a fixed ratio
Press the [MODE
SELECT] key ( ) and
select a fixed ratio
(AB system: A5 → A4
(141%), A4 → A5 (70%),
and 50%.
Inch system: 5.5X8.5 →
8.5X11(129%), 8.5X11 →
5.5X8.5 (64%) and 50%).
3
Set the number of copies and other
settings, and then press the [COPY
START] key ( ).
The copy will be delivered to the paper output
tray.
Original position Selectable ratios
Document glass
AB system: A5 → A4 (141%), A4 → A5 (70%) and 50%
Inch system: 5.5X8.5 → 8.5X11(129%), 8.5X11 → 5.5X8.5 (64%) and 50%
Be sure to close the document cover after
placing the original. If left open, the area
outside the original will be copied black,
causing excessive use of toner.
Select the correct paper according to the
ratio, otherwise, the image will be printed
outside the paper.
Note
Note
To return the ratio to 100%, press the [MODE
SELECT] key ( ) until the 100% indicator
lights up.
Note