Filter
Top Products
Getting Started 9
2.
Plug the flat end of the Travel Charger into the Charger/
Accessory Interface connector on the device (1) and the
other end into a standard AC wall outlet.
Warning!:
While the device is charging, if the touch screen does not function
due to an unstable power supply, unplug the USB power adapter
from the power outlet or unplug the USB cable from the device.
3. When charging is finished, remove the flat end from the
Charger/Accessory Interface connector on the device.
Note:
Failure to unplug the wall charger before you remove the battery, can
cause damage to the device.
Turning Your Device On and Off
Turning Your Device On
ᮣ
Press and hold the
Power/Lock
Key
.
Note:
Your device’s internal antenna is located along the top back of the
device. Do not block the antenna; doing so may affect signal quality
and may cause the device to operate at a higher power level than is
necessary.
Turning Your Device Off
1. Press and hold the
Power/Lock
Key
.
2. At the prompt, touch
Power off
.