Filter
Top Products
r
AR-3000 RS-232C Reference -46
21 Unsupported card or Incorrect format. Please change cards or format card.
100 The AR-3000 received a “2Q” or “3Q” command even though the specified
phrase was not a pattern phrase.
101 A “PQ” or “TQ” command is used to request output even after the setting
information of the last phrase has been output.
102 The AR-3000 received an RE command even though it was not in record-ready
mode.
202 There is no time information for the specified phrase.
300 The command is not compatible with the Dual Mono mode.
301 Specify a time parameter within the phrase recording time.
302 Phrases other than audio phrases cannot be specified.
303 Phrases other than MIDI phrases cannot be specified
304 Phrases other than audio phrases, MIDI phrases, and pattern phrases cannot
be specified.
305 There is no blank phrase.
306 In the Delete mode, only editing commands are processed.
307 Before sending an RL command, first specify a phrase with the PA command.
308 The Dual Mono mode supports only monaural phrases.
309 The settings cannot be output, because it is expanded function in AR-3000.
Please use the request command corresponding to AR-3000.
310 To execute the edit operation, transmit “ACK”. To cancel the delete operation,
Transmit “stxER:1” .
311 The AR-3000 received a “GQ” command even though the specified phrase was
not a song phrase.
312 There is no signal input from the Digital In jack. Send signals from the
digitally connected equipment.
313 The command does not correspond to the selected phrase.
314 Phrase Join cannot be executed unless the RDAC-Grade,RDAC-Mode, and
recording type are the same for both phrases.
315 A card in AR-2000 format was inserted in either slot A or B (or both).
Or the syntax of the command was incorrect or inappropriate.
Note: When these commands occur, commands from the external device will be ignored.
= ACK
Function: Acknowledge normal status, indicate normal reception of a command
Syntax: ACK (06H)
= Xon (11H) / Xoff (13H)
Function: Allow or disable transmission. Used for handshaking.
Syntax: Xon is 11H only (transmission permitted)
Xoff is 13H only (transmission disabled)