Filter
Top Products
r
AR-3000 RS-232C Reference -11
4.2.2 Editing Commands
= DM (Delete Mode)
Function: Enable execution of editing commands.
Syntax: stxDM;
Note: In order for editing commands to be executed, the DM command must be used to put
the unit into Delete mode. For the communication protocol, refer to 4.1 2) Editing
commands.
Caution:When Delete mode is exited, the AR-3000 will automatically output a CC command.
The AR-3000 automatically escapes from the Delete mode two minutes after the DM
command is issued. To run editing commands, send a DM command again to enter
the Delete mode
.
Card Editing
= CD (Card Delete)
Function: Delete Card
Syntax: stxDM;
stxCD: * ;
a
a Card in slot
0 Card in slot A
1 Card in slot B
Example) CD:0;
Erase all phrases from a PC card in slot A.
= CP (Card coPy)
Function: Copy Card
Syntax: stxDM;
stxCP;
Note: This copies the contents of the card in slot A to the card in slot B.
> CO ( Card cOnvert for AR-3000 )
Function: Convert Card
Syntax: stxDM;
stxCO: * , * ;
a b
a Convert type
0 AR-3000 to AR-2000
1 AR-2000 to AR-3000
b Select card
0 Card in slot A to Card in slot A
1 Card in slot A to Card in slot B