Filter
Top Products
r
AR-3000 RS-232C Reference -25
< SM (SysteM for AR-2000)
Function: System settings
Syntax: stxSM: * , * , * , * , * , * ;
a b c d e f
a Card in slot
0 Card in slot A
1 Card in slot B
b Line Input select
0 Mute : Line Thru ON , Volume 0%
1 Mix : Line Thru ON , Volume 100%
2 OFF : Line Thru OFF
c Channel Playback (Dual Mono mode)
0 OFF
1 ON
d Control Input select
0 Normal playback : for Direct Playback
1 Last-In playback : for Direct Playback
2 Sequence playback : for Direct Playback
3 Program(Count) playback
4 Binary playback
e Binary Playback Input Trigger
0 Level: Level On , Edge Off
1 Edge: Level Off , Edge On
f Busy Output
0 All On: Delay Time On , Phrase Playback On , Repeat Interval On
1 Delay On: Delay Time On , Phrase Playback On , Repeat Interval Off
2 Repeat On: Delay Time Off , Phrase Playback On , Repeat Interval On
3 All Off: Delay Time Off , Phrase Playback On , Repeat Interval Off
Example) stxSM:0,0,0,0,1,0;
System data will be written to “Card A”, and settings will be made for Line Input
select “MUTE”,
Channel Playback “OFF”, Control Input select “Normal playback”, Binary Playback
Input Trigger Mode “Edge”, and Busy Output “All On.”
Note: Use LS to protect a recorded phrase.
> CI (Control In setup for AR-3000)
Function: Control Input Mode setting
Syntax: stxCI: * , **** , **** , .... , **** ;
a b c
....
q
a Card in slot
0 Card in slot A
1 Card in slot B
b Control Input Mode
0 Direct Play
1 Program(Count Play)
2 Binary Play
3 Terminal REC
c Direct Playback Method
0 Normal
1 First In
2 Last In
3 Sequence