Filter
Top Products
r
AR-3000 RS-232C Reference -9
Recording Commands
= AE ( Auto inc rEc start )
Function: Starting Time-stamped Recording
Syntax: stxAE: **** , ** , ** , ** , ** , ** , * ,* , * ;
a b c d e f g h i
a year ( 1998 – 2050 ) h RDAC-Mode
b month ( 1 – 12 ) 0 Linear
c day ( 1 – 31 ) 1 Mode 1
d hour ( 0 – 23 ) 2 Mode 2
e minutes ( 0 – 59 ) 3 Mode 3
f second ( 0 – 59 ) 4 H – Linear
g RDAC-Grade I Recording Type
0 Announce 0 Mono
1 Long 2 1 Stereo
2 Long 1
3 Standard
4 High
5 S-High
Example) stxAE:2001,3,1,8,59,0,0,1,0;
Add a time stamp for “2001” “March” “1” “8:59:00” and start recording with “Announce”
“Mode1” “Mono.”
Note: The time information given in the command can be stored in the recorded phrase as a
time stamp.
The AR-3000 starts recording immediately when it receives an AE command. (It is not
necessary to send an RE command.)
The phrase number is automatically assigned to a free number where nothing is recorded.
Use the ST command to stop recording.
Also, the AR-3000 automatically returns the total number of phrases recorded on the
card when it receives an AE command. (Refer to AE command 4 . 4 . 1 )
= RE (REc start)
Function: Start recording
Syntax: stxRE;
Note: When using the RE command, you must first use the RM command to put the unit in
Record ready mode. To stop recording, use the ST command.
Recording starts when audio higher than the trigger level is input.
the following four types of trigger recording setteings are available.
OFF: Trigger recording is not performed.
LOW: Recording starts when audio higher than -45dB.
MID: Recording starts when audio higher than -36dB.
HIGH: Recording starts when audio higher than -27dB.