Filter
Top Products
E-16
PRINTER
PC
1
2
3
1 Connect the DC plug of the AC power adapter to the DC power connector of the
copyboard.
2 Connect the AC power cord to the AC power adapter.
Once the printer and the copyboard’s power supply are connected, fasten them in place using the included cable clips
and cable ties.
3 Plug the AC power cord into a AC power outlet in a wall.
The main power turns on. In this manual, this is referred to as the “standby mode”.
The descriptions in this manual assume that the AC power adapter is connected (that the unit is in the standby mode).
When not using the copyboard for long periods of time
Disconnect the AC power adapter’s power plug from the AC power outlet in the wall.
AC power adapter
(supplied)
AC power cord
(supplied)
DC plug
Notice
• When the AC power adapter’s power plug is unplugged from the power outlet, place the copyboard near the power outlet
so that it can be reached easily.
• The supplied AC power adapter and AC power cord are intended for exclusive use with this product. Never use them with
another product.
Connecting the Copyboard’s AC Power Adapter
To use the copyboard, connect the supplied AC power adapter.
Wall outlet
* Be sure to insert all the plugs securely.
Connection