Filter
Top Products
Settings
Settings
77
Settings
76
Settings
Vehicle Mode
If you listen to your inno in a vehicle, you’ve probably plugged the power adapter into the
cigarette lighter socket. In some vehicles, the cigarette lighter is turned on or off with the
ignition key; in other vehicles,the cigarette lighter is powered all the time.To prevent your
battery from being drained, choose one of the following settings:
1. Select XM
➝
Settings
➝
Setup
➝
Set Time
➝
Vehicle Mode.
2. Choose one of the following settings:
3.The setting is saved even if you turn inno off.The vehicle mode setting is only active when
you use the car dock.
OFF Choose this option if the cigarette lighter
is always powered.You must turn inno
on or off using its own power switch.
ON Choose this option if the ignition key
switches the cigarette lighter on and off.
OFF or Another option if the cigarette lighter is
60-180 minutes always powered: inno automatically turns
off 60 to 180 minutes after you turn it on.
Auto ON/OFF
Delayed Power Off
Memory Partition
The internal storage in inno can store recorded XM content and MP3/WMA files.By default,
the storage is divided 50/50, but you can select different memory partitions:
To change the memory partition:
1. Place your inno into the home dock and connect the AC power adapter.
2. Select XM
➝
Settings
➝
Setup
➝
Memory Partition.
3. Highlight the desired setting and press the XM button.
4. Confirm by selecting Yes,or cancel by selecting No.
typical storage for content typical storage for PC
recorded from XM (MP3 and WMA) tracks
50/50 XM/PC files 25 hours 8 hours
100% XM 50 hours 0 hours
CAUTION: When you change the memory partition,you will erase all your stored XM content
and MP3/WMA tracks from your inno.
setting
enginno_usergd.r1.qxd 3/27/06 6:04 PM Page 76