Filter
Top Products
17User manual
ENGLISH
If your server requires authentication to
download the firmware file, enter the name
of the user account, the password, and
confirm the password. Otherwise leave the
USERNAME, PASSWORD and CONFIRM
PASSWORD text fields empty.
Enter the full path and file name to the .bcd
file of the new firmware into the PATH ON
SERVER text field.
Press the UPGRADE NOW button to start
the upgrade process.
D Note: Once the firmware upgrade is
complete, the LAN Docking Station will
restart. You may get disconnected from the configuration interface.
3.11 Resetting to factory defaults
Follow these steps to reset the LAN Docking Station to its factory default configuration settings:
B Warning: When you reset the LAN Docking Station, all your configuration settings will be lost.
Make sure that the LAN Docking Station is connected to the main power supply using the
Philips power supply.
Slide a Digital pocket Memo 9600 or 9620 into the docking slot of the LAN Docking Station.
Press and hold the FUNCTION and the MENU button on the Digital Pocket Memo
simultaneously for 3 seconds.
The configuration settings of the LAN Docking Station will reset to their factory defaults,
and the LAN Docking Station will restart. The IP address of the LAN Docking Station will be
set to 192.168.109.1 (subnet mask 255.255.255.0).
Open the LAN Docking Station configuration interface by entering its IP address in your
Web browser.
You will be prompted to enter a user name and a password. Leave the user name field empty
and enter ‚administrator‘ in the PASSWORD field.
Change the IP address of the LAN Docking Station according to your network policy. See
Changing the IP address of the LAN Docking Station on page 13 for more information.
7�
8�
9�
1�
2�
3�
4�
5�
6�
7�