Filter
Top Products
20
8 Product
information
Note
Product information is subject to change •
without prior notice.
Specifications
Amplifier
Total output power 2 x 2 W RMS
Frequency response 125 Hz - 16 kHz
Signal to noise ratio ≥ 60 dBA (IEC)
Impedance loudspeakers 8
Disc
Laser type Semiconductor
Disc diameter 12 cm /8 cm
Support disc CD-R, CD-RW
Audio DAC 24 Bits / 44.1 kHz
Frequency range 125 Hz -16 kHz
Signal to noise ratio 65 dBA
Tuner
Tuning Range FM: 87.5 - 108MHz
DAB: 174.92 - 239.20
MHz
FM 26dB Sensitivity 20 μV
Total Harmonic
Distortion
< 5%
Speakers
Bass reflex system
Dimensions
(w x h x d) 134 x 230 x 152 mm
1 During playback, press TIMER/SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, »
displays.
To deactivate sleep timer
1 Press TIMER/SLEEP repeatedly until [00]
displays.
»
disappears on the display.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press AUX on the remote control to
select AUX source.
2 Use an audio cable (not supplied) to
connect DCB146’s AUX jack (3.5 mm,
located on the back panel) to AUDIO
OUT or headphone jack on the external
device (such as CD player or VCR).
3 Start to play the device (see the device
user manual).
Listen through headphone
1
Plug a headphone into the HEADPHONE
socket (3.5 mm, located on the back
panel).
EN