Filter
Top Products
25
RQT9754
ENGLISH
3 Attach the wall mount bracket to the wall with
2 screws (not supplied). (Both sides)
≥ Use a level to ensure both wall mount brackets are
level.
4 Fix the safety holder onto the unit with the
screw (supplied).
{. Screw tightening torque: 50 N0cm (0.4 lbf0ft) to
70 N0cm (0.5 lbf0ft).
5 Attach the fall prevention cord (not supplied) to
this unit.
6 Hook the unit securely onto the wall mount
brackets with both hands.
≥ Connect the FM antenna and the AC power supply
cord to the unit before hanging the unit onto the
wall. (l 6)
≥ After hanging the unit, release your hands carefully
to confirm the unit sits securely on the wall.
7 Drive the safety holder fixing screw
(not supplied) to secure the safety holder onto
the wall.
≥ Refer to step 3 for requirements before screwing.
8 Attach the fall prevention cord (not supplied) to
the wall.
≥ Make sure that the slack of the cord is minimal.
300 mm (11
13
/16q)
232 mm (9
7
/8q)
700 mm (27
1
/2q)
66 mm
(2
5
/8q)
202 mm (8q)
125 mm (4
7
/8q)
143 mm
(5
5
/8q)
500 mm (19
5
/8q)
118 mm
(4
5
/8q)
30 mm
(1
1
/8q)
Space required
At least 30 mm (1
3
/16q)
‰7.5 mm (
19
/64q)
to
‰9.4 mm (
3
/8q)
‰4 mm
(
5
/32q)
Wall mount bracket
Screw
(supplied)
Cord (not supplied)
Wall
Safety holder fixing screw
(not supplied)
Safety holder
Fixed to the
wall
Cord (not supplied)
Screw eye (not supplied)
Wall
RQT9754~body1_mst.fm Page 25 Thursday, December 20, 2012 11:52 AM