Filter
Top Products
83
7
EN
Alarm message list/Troubleshooting
Alarm message list/Troubleshooting
Troubleshooting
Message Meaning Explanation Action
[Can’t make the
system file. Connect
to PC and delete
unnecessary file]
The management file
cannot be created.
The file for management
cannot be created due
to a shortage of capacity
for remaining memory.
Connect the recorder to
a computer and delete
any unnecessary files.
[Cannot play this file]
File which cannot be
played.
Incompatible format.
Please confirm the file
that can be played on
this recorder (☞ P.34).
[This file can't be
divided]
File which cannot be
split.
Attempting to split a file
besides the MP3 or PCM
files recorded in this
recorder.
Please select another file.
Symptom Probable cause Action
Nothing appears on
the display
The batteries are not loaded properly.
Verify that the batteries’ polarities =
and - are correct (☞ P.10).
Battery power is getting low.
Charge the battery (For WS-710M,
WS-700M only) or replace with new
battery (☞ P.10, P.12).
The power is off.
Turn the power on (☞ P.15).
Won’t start
Battery power is getting low.
Charge the battery (For WS-710M,
WS-700M only) or replace with new
battery (☞ P.10, P.12).
The power is off.
Turn the power on (☞ P.15).
The recorder is in HOLD mode.
Release the recorder from HOLD
(☞ P.16).
Unable to record
Low remaining memory.
Erase unnecessary files (☞ P.39).
The maximum number of files has
been reached.
Change to the another folder
(☞ P.22 to P.24).
No playback tone
heard
The earphone is connected.
Unplug the earphones to use the
internal speaker.
[Speaker] is set to [Off].
To play back using the built-in speaker,
set [Speaker] to [On] (☞ P.47, P.57).
The volume level is set to [00].
Adjust the volume level (☞ P.31).