Filter
Top Products
32
3
EN
Playback
To EAR
jack
Playback
Settings relating to playback
[Noise Cancel]*1
(☞ P.47, P.53)
If recorded audio is difficult
to understand because of
noisy surroundings, adjust
the Noise Cancel setting
level.
[EUPHONY]*2
(☞ P.47, P.53)
The EUPHONY setting can
be set to one of 4 levels
according to your preference.
[Play Mode]
(☞ P.47, P.54)
You can select the playback
mode that fits your
preference.
[Voice Filter]*1
(☞ P.47, P.54)
The recorder has a Voice
Filter Function to cut low
and high frequency tones
during normal, fast, or slow
playback, and enable clear
audio playback.
[Equalizer]*2
(☞ P.47, P.55)
If you change the equalizer
setting, you can enjoy the
music with your favorite
sound quality.
[Skip Space]
(☞ P.47, P.55)
The skip interval length can
be set.
[Play Scene]
(☞ P.47, P.55)
Playback settings of your
choice can be saved to suit
different sound qualities and
playback methods.
*1 Can be operated only in [Recorder] mode.
*2 Can be operated only in [Music] mode.
For WS-710M/WS-700M:
[Play Mode]
(☞ P.47, P.54)
You can select the playback
mode that fits your
preference.
[Voice Filter]
(☞ P.47, P.54)
The recorder has a Voice
Filter Function to cut low
and high frequency tones
during normal, fast, or slow
playback, and enable clear
audio playback.
[Skip Space]
(☞ P.47, P.55)
The skip interval length can
be set.
[Play Scene]
(☞ P.47, P.55)
Playback settings of your
choice can be saved to suit
different sound qualities and
playback methods.
For WS-600S:
Playback through earphone
An earphone can be connected to the EAR
jack of the recorder for listening.
• When the earphone is used, the recorder
speaker will be switched-off.
Notes
•
To avoid irritation to the ear, insert the
earphone after turning down the volume level.
• When you listen with the earphone during
playback, do not raise the volume too
much. It may cause hearing impairment and
decrease in hearing ability.