Filter
Top Products
DS5 User Guide
Chapter 3 - Software Configuration
In following chapters, by DS5 we are referring to all of the models, as the software is
identical. To configure your DS5, connect it to your TV or any other display. Turn on the
device and wait for it to boot. Depending on the drive installed and the network, this could
take between 10 and 30 seconds.
Note: The DS5 will only look for new network devices during boot up. If you change any of
the network related settings, restart the device to ensure the new setup takes effect.
1. After the system has booted, you will see the main screen on your screen. To
access your files, select the file type or use All Media and press Enter.
2. Select the directory where you files are stored and press Enter to browse for your
files. HDD is the local drive or CF card, PC1/2 are links to a local network disk or
computer and USB1/2 are the drives attached to the USB ports.
3. To enter the setup menu, press the SETUP button on your remote control.
Page 18 / Chapter 3 - Software Configuration