Filter
Top Products
DS5 User Guide
Drive Assembly - DS5M
If your setup requires an internal drive, open the case and install a hard drive before
turning the unit on.
2.5” HDD
1. Lift the top cover off the body. If it’s
already locked in place, push it
upwards with a thin and small item
through the opening at the bottom.
2. Remove the screws which are holding
the aluminium frame in place.
3. Lift the frame out of the plastic casing.
4. Align the screw threads of the hard
drive with the holes in the framing and
place it in the frame.
Page 10 / Chapter 2 - Hardware Installation