Filter
Top Products
- 38 -
settings: StartPause, StrtPausTR, EDL Mark, and
Manual TRK.
(or push and release the Stop CANCEL button
to cancel all changes).
Display returns to stop mode.
ID1Dscrpt, ID2Origin, ID3OrRef (Broadcast
Wave ID numbers)
Broadcast Wave Format (.bwf/.wav) has three identi-
fication numbers in the header (Extension Chunk):
Description, Originator, and Originator Reference.
For example, if the IDs are used for a broadcast
station ID1 could be the identifier of the station, ID2
could be used for the department code, and ID3 for
the badge number of the reporter.
Default is all ID numbers at 000000.
1. From stop push and release the MENU/STORE
button.
2. Turn the Jog Wheel to select Preset1, 2 or 3.
3. Push and release the Jog Wheel to accept the
selected Preset.
4. Turn the Jog Wheel so ID1Dscrpt, ID2Origin, or
ID3OrRef is displayed and flashing.
Example
display
5. While the ID# is flashing, push and release the Jog
Wheel. The first number of the ID will be flashing.
6. Turn the Jog Wheel to tab through numbers (and
alphabetic characters).
Example
display
Example
display
7. When correct, push and release the Jog Wheel.
The number position will be flashing.
Example
display
Repeat steps 6 and 7 until all ID numbers are
correct.
8. After the last number, push and release the Jog
Wheel. The display returns to the ID# flashing.
9. If you are done making Menu changes to the
Preset, push and release the MENU/STORE button
to save your changes,
(or push and release the Stop CANCEL button
to cancel all changes).
Display returns to stop mode.
Example
display
7. When correct, push and release the Jog Wheel.
The display returns to Remote flashing.
8. If you are done making Menu changes to the
Preset, push and release the MENU/STORE
button to save your changes,
stored will be
displayed
briefly
stored will be
displayed
briefly