Filter
Top Products
- 34 -
SilentSkp (Silent Skip)
Silent skip automatically pauses recording when there
is a period of silence and resumes recording when
sound resumes. Sometimes this feature is referred to
as voice activated recording. Silent Skip looks for
sound below a preset level for a preset period of time.
When that occurs the PMD570 switches to record
pause. When a signal of about -30 dB is input record-
ing resumes.
The SilentSkp Menu settings permit:
• turning Silent Skip On or Off
• adjusting the silent time period in one second
intervals from 1 to 5 seconds, and
• adjusting the margin sound level that defines
silence in -5 dB increments from -20 to -60 dB.
When the Auto Mark menu choice is at On resump-
tion of recording after a record pause by Silent Skip
adds an EDL mark.
Default settings are Off, 3 seconds, and -40 dB.
1. From stop push and release the MENU/STORE
button.
2. Turn the Jog Wheel to select Preset1, 2 or 3.
3. Push and release the Jog Wheel to accept the
selected Preset.
4. Turn the Jog Wheel so SilentSkp is displayed and
flashing.
5. While SilentSkp is flashing, push and release the
Jog Wheel. The On or Off will be flashing.
6. Turn the Jog Wheel to toggle between On and
Off.
Example
display
-dB
Example
display
-dB
7. When correct, push and release the Jog Wheel. The
display switches to time interval flashing.
Example
display
-dB
8. Turn the Jog Wheel to tab through the silent time
interval choices (1 - 5 seconds).
When correct, push and release the Jog Wheel.
The display switches to -dB flashing.
9. Turn the Jog Wheel to tab through the margin
sound level choices (-20 through -60 dB in 5 dB
units). When correct, push and release the Jog
Wheel. The display returns to SilentSkp flashing.
Example
display
(or push and release the Stop CANCEL button
to cancel all changes).
Display returns to stop mode.
Note:
When Silent Skip is On S.SKIP appears in the display
during stop, record and playback.
-dB
Example
display
S.SKIP
TRACK
TRACKTIME
L
R
-dB
S.SKIP
-dB
over
0
26
1
2
20
40
00
10. If you are done making Menu changes to the
Preset, push and release the MENU/STORE
button to save your changes,
-dB
stored will be
displayed
briefly