Filter
Top Products
11
The alarm will be automatically ON when the alarm time is set. To deactivate the alarm
(OFF), press and release once the ALM key in normal mode display. The alarm icon will
disappear, the alarm is now off.
SNOOZE SETTING
The snooze button can only be used while the alarm is sounding. The snooze period is 10
minutes long. After the 10 minute snooze period, the alarm with sound again.
OUTDOOR TEMPERATURE TRANSMITTER:
The temperature is measured and transmitted to the radio-controlled clock every 1 minute.
The radio-controlled clock will update the temperature display every 5 minutes.
The range of the outdoor temperature transmitter may be affected by the temperature. At
cold temperatures the transmitting distance may be decreased. Please bear this in mind
when positioning the transmitter. Also the batteries may be reduced in power during periods
of extreme cold temperatures.
433MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE
TRANSMITTER
The radio-controlled clock will receive the temperature data within 15 minutes. If the
temperature data is not received 15 minutes after setting up (the display shows “- - -”), then
please check the following points:
1. The distance of the radio-controlled clock or outdoor temperature transmitter should be
at least 6 feet away from any interfering sources such as computer monitors or TV
sets.
2. Avoid placing the receiver onto or in the immediate proximity of metal window frames.
3. Using other electrical products such as headphones or speakers operating on the
same signal frequency (433MHz) may prevent correct signal transmission and
reception.
4. Neighbors using electrical devices operating on the 433MHz signal frequency can also
cause interference.
A
larm icon
(((•))) (ON)