Filter
Top Products
9
between 12:00 am and 6:00 am the next day. The other times WWVB reception takes place,
are upon setup and after manual time set exiting mode. Reception is generally not possible
during daylight hours due to the interference of the sun.
YEAR SETTING
The year can be selected sequentially from 2000 to 2049 and will then start over again
(default setting 2000). Only the last 2 digits of the year will be visible on LCD2.
1. The year digits will start flashing on LCD2. Select the desired year by use of the + key.
2. Press and release the SET key to switch to the “Month Setting”.
MONTH SETTING
1. The month digits on LCD2 will start flashing. Set the desired month by use of the +
key.
2. Press and release the SET key to move to the mode “Date Setting”.
DATE SETTING
1. The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired
date by use of the + key.
Note: The date can only be set in conjunction with the selected month. For example, it
is not possible to set the date 30 if the month of February is selected.
2. Press and release the SET key to enter the “Weekday Setting”.
WEEKDAY SETTING
1. The weekday symbols will be displayed flashing on LCD2 in the pre-set language
section. Set the desired weekday by use of the + key.
2. Press and release the SET key to enter the mode “12/24 Hours Time Display
Setting”.
12/24 HOURS TIME DISPLAY SETTING
1. The “12” or “24” will start flashing in LCD1 (Default setting 12h). Select the desired
time display mode by use of the + key.
2. Press and release the SET key to enter the “ºC/ºF Temperature Setting“.
°C OR °F TEMPERATURE SETTING