Filter
Top Products
3
INVENTORY OF CONTENTS
1. The indoor weather station (Figure 1).
2. One remote temperature/humidity sensor with mounting bracket (Figure 2).
3. Three each, ½” Philips screws.
4. One strip double-sided adhesive tape.
5. Instruction manual and warranty card.
ADDITIONAL EQUIPMENT (not included)
1. Two fresh AAA 1.5V batteries (for indoor weather station)
2. Two fresh AAA 1.5V batteries (for temperature/humidity sensor)
3. One Philips screwdriver
4. One Standard screwdriver
Figure 1
Figure 2
Battery cover
Battery
compartment