Filter
Top Products
18
humidity reading in the temperature/ humidity portion of the LCD within 4
minutes of setting up.
I. THE REMOTE TEMPERATURE/HUMIDITY SENSOR
The remote temperature/humidity sensor can be mounted in three
ways:
• Mounting with screws
• Mounting with adhesive tape
• Using the bracket as a stand
A. MOUNTING WITH SCREWS
1. Remove the mounting bracket from the remote
temperature/humidity sensor.
2. Place the mounting bracket over the desired
location.
3. Through the screw holes of the bracket, mark the
mounting surface with a pencil.
4. Screw mounting bracket onto the mounting
surface. Ensure that the screws are flush with the
bracket.
5. Insert the remote temperature/humidity sensor into
the bracket.
B. MOUNTING WITH ADHESIVE TAPE
1. With a nonabrasive solution, clean and dry the
back of the mounting bracket and the mounting
surface to ensure a secure hold. The mounting
surface should be smooth and flat.
2. Remove the protective strip from one side of the
tape.
3. Adhere the tape to the designated area on the back
of the mounting bracket.
4. Remove the protective strip from the other side of
the tape.