Filter
Top Products
8
6. When the correct hour is shown,
press and release the “SET” button
once.
Press and release the SET button once
more and you are done.
DETAILED SETUP GUIDE
BATTERY INSTALLATION - When one
Temperature sensor is being used
1. First, insert the batteries to the
Temperature sensor (see “A.
Temperature sensor” below).
2. Within 2 minutes of powering up the
sensor, insert the batteries to the
Temperature Station (see “B. Indoor
Temperature station” below). Once the
batteries are in place, all segments of
the LCD will light up briefly. Following
the indoor temperature and the time as
12:00 will be displayed. If they are not
shown in LCD after 60 seconds, remove
the batteries and wait for at least 60
seconds before reinserting them. Once
the indoor data is displayed user may
proceed to the next step.
3. After the batteries are inserted, the
Temperature Station will start receiving