Filter
Top Products
18
b. Mount using either screws or adhesive
tape.
c. Reattach the temperature sensor to the
mounting bracket.
2. THE TEMPERATURE STATION
e. The indoor temperature station
comes with the table stand already
mounted. If you wish to use the
table-stand, all that is required is to
place the indoor temperature station
in an appropriate location.
f. To wall mount, remove the table
stand. To do this, pull down on the
stand from the rear and rotate
forward. Fix a screw (not included)
into the desired wall, and place the
indoor temperature station onto the
screw using the hanging hole on the
backside. Gently pull the indoor
temperature station down to lock the
screw into place.
TROUBLESHOOTING
NOTE: For problems not solved, please
contact La Crosse Technology via e-mail or
phone, or visit our website,
www.lacrossetechnology.com