15
5. Insert the batteries to the second sensor
as soon as the outdoor temperature
readings from the first sensor are
displayed on the Temperature station.
NOTE: You must insert the batteries
into the second sensor within 45
seconds of reception of the first
sensor.
6. The outdoor temperature from the
second sensor and the "channel 2" icon
should then be displayed on the
Temperature station. If this does not
happen after 2 minute, the batteries will
need to be removed from all the units
and reset from step 1.
7. Insert the batteries to the third sensor as
soon as the "channel 2" icon and
outdoor data are displayed on the
Temperature station. Then within 2
minutes, the channel 3 outdoor data
from the third sensor will be displayed
and the channel icon will shift back to "1"
once the third sensor is successfully
received. If this is not happen, user shall
restart the setting up from step 1.