Filter
Top Products
5
3. Place the batteries into the remote
temperature sensor first then into the
indoor temperature station.
(All remote temperature sensors must be
started before the indoor temperature station)
4. DO NOT PRESS ANY BUTTONS FOR
15 MINUTES.
In this time the indoor temperature station and
remote temperature sensor will start to talk to
each other and the display will show both the
indoor temperature and an outdoor
temperature. If the indoor temperature station
does not display both temperatures after the
15 minutes please retry the set up as stated
above. After both indoor and outdoor
temperatures are displayed for 15 minutes
you can place your remote temperature
sensor outdoors and set your time.
The remote temperature sensor should be
placed in a dry, shaded area. The thermo-
hygro sensor has a range of 330 feet. Keep
in mind that the 330 feet is in open air with no
obstructions and that radio waves DO NOT
curve around objects. Actual transmission
range will vary depending on what is in the
path of the signal. Each obstruction (roof,