Filter
Top Products
12
910MHz. This will also be done for re-
synchronization.
SETTING THE TIME
1. Press and hold the “SET/CH” button for
5 second,
“12h” will
appear in the
TIME LCD.
2. Press and release the “MIN/MAX”
button to select either 12h time (am/pm)
or 24h time
3. Press and release the “SET/CH” button
2 times, the hour will flash in the upper
left corner.
4. Press and release the “MIN/MAX”
button to set the hours
5. Press and release the “SET/CH” button
to move to the minute setting
6. Press and release the “MIN/MAX”
button to set the minutes.
7. Press and release the “SET/CH” button
to activate the clock.
Note: When in 12h mode, there is only a
“PM” display, which appears under “TIME.” If
there is no display here it is AM. Make sure
you set the time accordingly.