Filter
Top Products
7
To complete the set up of your indoor
temperature station after the 15 minutes have
passed please follow the steps below.
1. Press and hold the “SET/CH” button for
5 seconds.
Note: A “12h” or “24h” will appear on the
top line. (“12h” for AM/PM, “24h” for
military time)
2. To change between “12h” and “24h”
press and release the “MIN/MAX” button.
3. When you have your choice shown on
the display press and release the
“SET/CH” button once.
Note: if “12h” is selected, the temperature is
displayed in degree Fahrenheit. If “24h” is
selected, the temperature is displayed in
degree Celsius
4. An hour will now be flashing.
5. Press and release the “MIN/MAX” button
until the correct hour is shown.
Note: When in the 12h mode there is
“PM” displayed under the word TIME
when in the PM hours. During the AM
hours this area will be blank.