Filter
Top Products
34
KH 2370
35
KH 2370
C Switch o the combination unit by pressing the POW-
ER button and then wait ten seconds. Then switch the
combination unit back on, by pressing the POWER but-
ton again.
Display shows No Disc, although a disc
has been inserted
A The disc is dirty, scratched or damaged.
B The country code of the inserted DVD/VCD/S-VCD
does not match the country code of the combination
unit. The DVD/VCD/S-VCD cannot be played on the
combination unit.
Inserted disc is not being played back
A lm of condensation has probably formed on the laser
scanning lens of the combination unit. This can be the
case, in particular, if the combination unit has been ex-
posed to severe uctuations in temperature.
In this case put the combination unit in a
dry environment with a normal room temperature. First
of all remove any possible inserted disc from the disc tray.
Then leave the combination unit switched on for at least
one hour without using it until the lm of condensation
has evaporated.
No picture or black and white picture
A Check whether the connecting cable(s) between the
combination unit and the television are rmly plugged
into the corresponding jacks.
B Check whether the settings in the OSD menu item VID-
EO OUTPUT match the connecting variant with which
you have connected the combination unit to the tel-
evision.
C Check the operating instructions of the television to
see, whether possible adjustments are necessary on
the television, to be able to use the combination unit
with the television.
No sound
A Check whether the television and/or combination unit
are possibly switched to mute.
B Check whether all the connecting cables between the
combination unit, surround loudspeakers and sub-
woofer are plugged in rmly into the corresponding
terminals/jacks. In addition check whether the sub-
woofer is switched on.
C Check the operating instructions of the television to
see, whether possible adjustments are necessary on
the television, to be able to use the combination unit
with the television.
D Check the operating instructions of any possible con-
nected audio component, whether adjustments are
necessary, to be able to use this component with the
television.
E If you
• have connected the combination unit to a stereo tel-
evision, but not to an audio component or
• have connected the combination unit to a Dolby Pro-
logic compatible audio component via the analog
stereo output (with a cinch cable to the AUX IN L and R
cinch jacks)
then check whether in the OSD menu item SPEAKER
SETUP, the stereo downmix has been switched on.
No : or : picture
Check the operating instructions of the television to nd
out which picture format the television has.
Then check whether the settings in the OSD menu item TV
DISPLAY match the available picture formats of the televi-
sion.
Remote control without function
A Check whether the batteries in the remote control
have been put into the battery compartment with the
correct polarities.
B Check whether the batteries in the remote control are
exhausted and if necessary change both batteries.
C Ensure that there are no obstacles between the remote
control and the combination unit.
D Do not move more than 5 meters away from the com-
bination unit when using the remote control.
Playback language/Subtitle language
does not correspond to the language in
the settings in the OSD menu
The playback language/subtitle language input in the
OSD menu is not available on the inserted disc.
One or more functions cannot be
switched on
Not all functions are available on the combination unit
with all DVDs/VCDs/S-VCDs, audio CDs and also CD-Rs/CD-
RWs with MP3 and JPEG les. Functions, which cannot be