Filter
Top Products
12
KH 2370
13
KH 2370
a coaxial cable which can be bought in specialised audio
equipment shops.
1 Plug in the coaxial cable into the COAXIAL jack of the
combination unit.
2 Plug in the other end of the coaxial cables into the cor-
responding jack on the Dolby Digital/DTS amplier.
Connect the surround loudspeakers and
subwoofer to the combination unit
The supplied surround loudspeakers are connected to the
combination unit by means of the supplied loudspeaker ca-
bles. Use the three shorter loudspeaker cables to connect
• the center loudspeaker and
• the front right and left surround loudspeakers
to the combination unit. Use both the long loudspeaker
cables to connect
• the rear right and left surround loudspeakers
to the combination unit. The subwoofer is connected to
the combination unit by means of one of the supplied
cinch cables.
The supplied surround loudspeakers are identical. You can,
e. g., use each of the loudspeakers as center loudspeaker,
front or rear surround loudspeaker.
1 To connect the surround loudspeakers, insert each
• end of the red leads of the loudspeaker cable into the
red terminal and
• end of the black leads of the loudspeaker cable into
the black terminals
on the back of the loudspeaker.
2 Then insert
• the end of the red leads of the loudspeaker cable into
the red terminal and
• the end of the black leads of the loudspeaker cable
into the black terminal
on the back of the combination unit. Insert the individ-
ual loudspeaker cables into the following terminals:
• the cable of the front right loudspeaker into the termi-
nal marked Front R
• the cable of the front left loudspeaker into the terminal
marked Front L
• the cable of the center loudspeaker into the terminal
marked Center
• the cable of the rear right loudspeaker into the termi-
nal marked Rear R
• the cable of the rear left loudspeaker into the terminal
marked Rear L
4 To connect the subwoofer: Plug in the supplied cinch
cable into the SUBWOOFER cinch jack of the combina-
tion unit.
Positioning the surround loudspeakers
To provide an optimal sound, the loudspeakers should be
positioned as follows:
• Front right and left surround loudspeakers on the right
and left of the television
• Center loudspeaker in the middle between the front
left and right surround loudspeakers
• Rear right and left surround loudspeakers on the right
and left behind your listening position
• The installation location of the subwoofer is optional,
as the human ear cannot locate the low tones of the
subwoofer.
Initial operation of the
combination unit
In order to be able to carry out the following settings be-
fore using the combination unit for the rst time:
1 Insert the power cord of the combination unit into a
power socket.
2 Insert the power cord of the subwoofer into a power
socket.
3 Press the POWER button to switch on the combination
unit.
4 Switch the power switch on the back of the subwoofer
to ON.
5 Press the POWER button on the front of the subwoofer
to switch it on.
Operating the OSD menu
Most of the settings on the combination unit are carried
out by means of the so-called on screen display menu