Kenwood TK-2200L Portable Radio User Manual


 
39
TROUBLESHOOTING GUIDE
Problem Solution
Cannot turn the
transceiver power
ON.
The battery pack may be dead.
Recharge or replace the battery pack.
The battery pack may not be installed
correctly. Remove the battery pack
and install again.
Battery power
dies shortly after
charging.
The battery pack life is nished.
Replace the battery pack with a new
one.
Cannot talk to or
hear other members
in your group.
Make sure you are using the same
frequency and QT/DQT settings as the
other members in your group.
Other group members may be using
the Scrambler function. Turn on your
transceiver’s Scrambler.
Other group members may be too
away. Make sure you are within range
of the other transceivers.
Other voices
(besides group
members’) are
present on the
channel.
Change the QT/DQT settings. Make
sure all group members change the
settings on their transceivers to match
the new QT/DQT setting.