Kenwood TK-2200L Portable Radio User Manual


 
4
BAttery pAck precAutionS
Do not use battery packs or battery chargers not recommended
by
KENWOOD
.
Do not recharge the battery pack if it is already fully charged. Doing
so may cause the life of the battery pack to shorten or the battery
pack may be damaged.
After recharging the battery pack, disconnect it from the charger.
If the charger power is reset (turned ON after being turned OFF),
recharging will start again and the battery pack will become
overcharged.
Do not use the transceiver while charging the battery pack. We
recommend you switch the transceiver power OFF while charging is
taking place.
Do not charge the battery pack when the battery pack or transceiver
is wet, to avoid the risk of re or damage. Wipe the water from the
battery pack or transceiver using a dry cloth before charging.
Do not short the battery terminals or dispose of the battery by re.
Never attempt to remove the casing from the battery pack.
Information concerning the Li-ion battery pack:
The battery pack includes ammable objects such as organic solvent.
Mishandling may cause the battery to rupture producing ames or
extreme heat, deteriorate, or cause other forms of damage to the
battery. Please observe the following prohibitive matters.
Do not disassemble or reconstruct battery!
The battery pack has a safety function and protection circuit to
avoid danger. If they suffer serious damage, the battery may
generate heat or smoke, rupture, or burst into ame.
Do not short-circuit the battery!
Do not join the + and – terminals using any form of metal (such
as a paper clip or wire). Do not carry or store the battery pack in
containers holding metal objects (such as wires, chain-necklace or
hairpins). If the battery pack is short-circuited, excessive current
will ow and the battery may generate heat or smoke, rupture, or
burst into ame. It will also cause metal objects to heat up.
PREPARATION