Filter
Top Products
17
KEY FUNCTIONS
Side 1 key
The default function of the
Side 1
key is Super Lock.
Super Lock is designed to prevent accidental function changes
on your transceiver, during operation.
Press and hold the
Side 1
key for 4 seconds to lock the
transceiver keys. The following keys/ functions can still be
used when Super Lock is active: Calling Alert, Monitor, Monitor
Momentary, PTT, Squelch Off, Squelch Off Momentary, and
Volume.
To deactivate Super Lock, with the transceiver power OFF,
press and hold the
Side 2
key for 2 seconds while turning the
transceiver power ON.
• When the LED lights orange, release the
Side 2
key. A conrmation
tone will sound.
Side 2 key
TK-2200L/ TK-3200L (K, K2) Models:
The default function of the
Side 2
key is Scan + Temporary
Delete.
You can scan the channels of the transceiver to search for a
signal. When the transceiver veries a signal on a channel, it
proceeds to check whether or not its QT/DQT setting which is
set up on your transceiver matches (if any).
If the QT/DQT matches, the transceiver stops at the channel and
opens the squelch so you can listen to the call. If the QT/DQT
does not match, the call is ignored and scanning continues.
Note:
You can only use Scan if there are at least 2 channels
available on your transceiver that are not locked out of Scan.