Filter
Top Products
EN 57
1. POWER button
•Turns the device on and off.
2. POSITION button
•Selects the position to store a scene in
memory for Multi-Print.
3. ID number
•Displays the selected device's ID
number.
4. Message display
•Displays the operating mode of the
selected device.
5. MULTI-PIX button
•Select by clicking (
ᮡ
/ᮢ) button.
OFF : Single print
4:4 shots on one sheet
16 : 16 shots on one sheet
6. CONTENT button
•Select by clicking (
ᮡ
/ᮢ) button.
STROBE : Stores the selected number of
images at short intervals, and
prints them all on one sheet.
SELECTED : Prints 4 or 16 selected scenes
on one sheet.
SAME : Prints the same scene 4 or 16
times on one sheet.
7. STROBE SPEED button
•Effective when "STROBE" is selected
from "CONTENT".
HIGH : When printing in the Strobe Print
mode, the GV-PT2 stores scenes
at intervals of approximately 1/
15 second.
LOW : When printing in the Strobe Print
mode, scenes are stored at
intervals of approximately 1/2
second.
8. PIX STABILIZER button
ON : If the scene you want to print is
jittery, select "ON" to stabilize it.
OFF : Usually set to "OFF".
9. STORE button
•Stores scenes and titles you want to
print in the video printer's memory.
10.PRINT button
When connected to the GV-PT2
•Print command is available.
11. SELECT (scene select) button
•Switches between "SOURCE" (images
from camcorder or VCR) and
"MEMORY" (scenes stored in memory)
for display on TV monitor.
12.CLOSE button
•Closes the "Video Printer" window.